Upper Control Arm Bolts
#1
Junior Member
Thread Starter
Join Date: Feb 2015
Location: Northern VA
Posts: 87
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2001
Model: Cherokee
Engine: 4.0
Upper Control Arm Bolts
Have been scouring the net as well as any local dealers and no one has the upper control arm bolts, body side available. Anyone have a link to something that would work in place of those bolts? My old ones snapped off during the CA replacement.
#2
CF Veteran
Join Date: Dec 2011
Location: IE (SoCal)
Posts: 1,080
Likes: 0
Received 6 Likes
on
5 Posts
Year: 1994 SE
Model: Cherokee
Engine: 4.0
Dang, those are hard to find aren't they? I'd help with the size but I'm finding conflicting sizes listed as well. I'd say go to the classified (part out) section of the forum and get some that way.
#3
Junior Member
Thread Starter
Join Date: Feb 2015
Location: Northern VA
Posts: 87
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2001
Model: Cherokee
Engine: 4.0
Yea the conflicting sizes is definitely not helping! Good thinking with the part out route, will check those out.
#4
CF Veteran
Join Date: Jul 2013
Location: Monett, MO.
Posts: 7,554
Likes: 0
Received 14 Likes
on
14 Posts
Year: 1999
Model: Cherokee
Engine: 4.0
When I replaced my upper and lower CA's with adjustable ones I just asked for new one to be included but can't remember the size and all of those items were thrown into a box with other suspension items.
Try any aftermarket vendor to see if they sell you a set of them.
Try any aftermarket vendor to see if they sell you a set of them.
#6
Newbie
Join Date: Aug 2013
Location: South Texas
Posts: 17
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2001
Model: Cherokee
Engine: 4.0
I think they are M10-1.25x70 but I used grade 8 7/16 bolts from Lowe's. I used a 7/16 drill bit to open up the holes. It didn't take much to enlarge them. I even re-used the "wings" that came with the originals. I ground off the swaged edges, opened them up with a die grinder and welded them on the new bolts.
Last edited by lamart72; 02-04-2016 at 09:58 AM. Reason: more info
Trending Topics
#9
Seasoned Member
Join Date: Dec 2012
Location: Indiana
Posts: 340
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1998
Model: Cherokee
Engine: 4.0
I bought mine from Fastenal. I used an M10-1.5x85 mm.
Uppers:
https://www.fastenal.com/products/de...ength:168700|~
I used these for lowers (with washers) if you need them:
https://www.fastenal.com/products/de...ength:172200|~
Uppers:
https://www.fastenal.com/products/de...ength:168700|~
I used these for lowers (with washers) if you need them:
https://www.fastenal.com/products/de...ength:172200|~
Thread
Thread Starter
Forum
Replies
Last Post
mmorris
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
5
02-03-2016 12:08 PM
WTB[GreatLakes]: WTB 3 inch sway bar links,coils,shocks & shackle bushings
BlvdKreeper
Wanted
3
02-02-2016 02:53 AM
BluegrassXJer
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
0
01-31-2016 12:07 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)