turn signals quit working

Subscribe
May 25, 2012 | 02:50 PM
  #1  
The turn signals in my 97 cherokee stopped working. What i do not understand is the markers and the hazards still work. Im at a loss. What could this be?
Reply 0
May 25, 2012 | 02:55 PM
  #2  
Relay under your steering wheel. Very common problem. Do a search on google for jeep cherokee turn signal relay and there is a video for youtube that pops up showing u what to do
Reply 0
May 25, 2012 | 02:57 PM
  #3  
Fuses?
Reply 0
May 25, 2012 | 03:02 PM
  #4  
Checked every single fuse and they are all good. I seen the post about the relay under the steering wheel but from what i read that same relay is for the hazards and my hazards work fine
Reply 0
May 25, 2012 | 03:10 PM
  #5  
check your headlight harness connector. also check your grounds and ultimately, it could be your beam selector switch mast.
Reply 0
May 25, 2012 | 03:55 PM
  #6  
checked the relay and it is good. what do i do to check the headlight selector mast?
Reply 0
May 25, 2012 | 07:15 PM
  #7  
My hazards worked and my signals didnt. Replacing relay fixed it.
Reply 0
May 25, 2012 | 08:28 PM
  #8  
i get lucky everytime my turn signals quit im able to turn my hazards on for a sec then my signals work again for a month or so
Reply 0
May 25, 2012 | 08:39 PM
  #9  
Odometer
My odometer doesn't come on. Also my blinkers work but if it blinks for 8 or so turns it stops. How do I fix this.
Reply 0
Jul 13, 2012 | 07:09 AM
  #10  
Not sure about your odometer, but your flasher relay is on its way out. My xj did the exact same thing. Advanced auto has the flasher for pretty cheap.
Reply 0
Jul 19, 2012 | 12:38 PM
  #11  
Thanks
Quote: Relay under your steering wheel. Very common problem. Do a search on google for jeep cherokee turn signal relay and there is a video for youtube that pops up showing u what to do
Thank you this fixed my jeep!
Reply 0
Jul 19, 2012 | 12:45 PM
  #12  
No problem. Glad i could help
Reply 0
Subscribe
Currently Active Users (1)