Turn Signal Problems
Help please! I dont know a whole lot about wiring and my turn signals have quit
working on me, they flash once and stop working, does any one know what the problem could be or trouble shooting i could do to solve the problem, i drive a 99 cherokee sport
working on me, they flash once and stop working, does any one know what the problem could be or trouble shooting i could do to solve the problem, i drive a 99 cherokee sport
I'm having a similar issue with my 2000 Cherokee as well. I've put in 2 relays and even changed out the switch. Mine will blink a few times and quit. It happens in both directions, however the flashers work perfectly fine. I think there is another problem. I'm going to check fuse #12. I've kind of run out of options.
Senior Member
Joined: Aug 2009
Posts: 914
Likes: 14
From: north carolina
Year: 2000
Model: Cherokee
Engine: 4.0
I'm having a similar issue with my 2000 Cherokee as well. I've put in 2 relays and even changed out the switch. Mine will blink a few times and quit. It happens in both directions, however the flashers work perfectly fine. I think there is another problem. I'm going to check fuse #12. I've kind of run out of options.
i have a 2000 grand cherokee ,turn signals dont work..... any idea where the relay would be??? i read on another post the ground for the rear lights is under the the rear driver side door sill, im gonna check that
Senior Member

Joined: Feb 2015
Posts: 514
Likes: 15
From: South Georgia
Year: 1996
Model: Cherokee(XJ)
Engine: 4.0l
check the headlight delay relay...it can cause the tail lights/ headlights to do some crazy stuff when it's bad.
https://www.cherokeeforum.com/f2/bra...g-help-211457/
https://www.cherokeeforum.com/f2/bra...g-help-211457/
Thread
Thread Starter
Forum
Replies
Last Post
kevintweet
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
1
Apr 7, 2016 12:22 PM
jeepboy4life
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
3
Apr 5, 2016 11:14 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)



