jonwalden68

Got a 99 jeep Cherokee Xj the turn signals little green lights that flash inside don't flash when there turned on what would cause that? They flash outside and work outside both ways. Just no signal inside lighting up

1976Mustang

I'm sure I don't have to ask this but lets just to be safe, you did check the lights in the dash correct?

Anyways, I know a common issue with 97+ clusters is they like coming loose from their main connector. Just try pressing firmly on the cluster to push it back.

jonwalden68

Yes I checked the bulbs and I'm bout to pull it to check to see if the connector could be loose

XJRed96

how did you check the bulbs without pulling the cluster? you would have checked the connector at that time

jonwalden68

I pulled it and replaced the bulbs and checked connections all is good still no lights blinking inside

jonwalden68

I actually took the bulbs back I swapped in and got another set and it works great I have had sensors be bad but not bulbs first time for that. No just to tackle the rattle from front end parts probly gonna do all new ball joints and everything