turn signal issue involving brake pedal??
05-22-2010, 03:28 PM
#1
Newbie
Thread Starter
Join Date: May 2010
Location: plainfield il
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
turn signal issue involving brake pedal??
Theres a real short summery to this problem, whenever the turn signals or hazards are on and you hit the brakes, they go dim and stop working, what could possibly cause that?? any help would be greatly valued! thanks
05-25-2010, 03:34 PM
#6
CF Veteran
Join Date: Feb 2010
Location: Oroville, CA
Posts: 12,367
Likes: 0
Received 19 Likes
on
18 Posts
Year: 1995
Model: Grand Cherokee
Engine: 4.0 with all of the noise and clatter
On 95-2001 models, check the plug at the back of the multi-function switch. See if the screw that secures it, in the center of the plug is tight or even there. I just ran across one that had all kinds of strange crap with the brake lights, hazards, and turn sigals going on. The screw was missing and the plug was loose. A new screw and the problem was solved.
Thread
Thread Starter
Forum
Replies
Last Post
BayArea93xj
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
8
06-11-2016 10:43 AM
madmanmarty
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
30
08-30-2015 03:17 PM
rusty_bucket
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
3
08-29-2015 06:42 AM
britishcolumbia
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
7
08-28-2015 04:08 PM
Cane
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
40
08-26-2015 12:08 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
