trying to get around 4 in of lift??help
Thread Starter
Member
Joined: Nov 2008
Posts: 207
Likes: 0
From: plant city
Year: 1992
Model: Cherokee
Engine: 4.0 h/o
right now i have the worst 2 in bb ever with cut flares clearing 31's. but i would like something either i can make from a bastard pack or buy..for the front bastard set i was going to use a 3 inch aluminum spacer and zj coils but i do not know what to use on the back..unless i just buy the 3 inch rough country and just add a coil spacer and a block or shackle..also i do not wanna spend the money for the 4.5..so any ideas
CF Veteran
Joined: Nov 2008
Posts: 1,251
Likes: 0
From: Eugene, OR
Year: 01
Model: Cherokee
Engine: 4.0L I6
get longer coils instead of 3" spacers. that will most likely end up being a fail. what size tires do you want to run? if your going to keep your 31's for a while, you wont need a 4" lift.
Thread Starter
Member
Joined: Nov 2008
Posts: 207
Likes: 0
From: plant city
Year: 1992
Model: Cherokee
Engine: 4.0 h/o
well i could spend up too 200 thats why i was just thinking of getting the rc lift but right now i used the metal coil spring helpers,there made to lift or drop,so i flipped them up and cranked them as high as they would go and got 2 1/2 in and used a 2 in block for the rear
Thread
Thread Starter
Forum
Replies
Last Post
Sandyman
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
1
Sep 10, 2015 09:21 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)



