Can someone please explain to me the easiest way to take out and reinstall the triangle windows up front. All help is appreciated.

 

Here is a good write up on it.
https://www.cherokeeforum.com/f59/ve...-99268/index2/

 

it takes loger to read that write up then do the job ...lol...

 

Hey thanks guys that write up is gonna help. And they always say its gonna be easy. But its an. Xj. Never know how its gonna go.

 

how about the windows that fold out, like on older trucks? can they be installed....

 

Follow this and all will be well.

 

There are two tapping screws in the forward edge of the door that thread into the mirror - remove these (should take a #2 Phillips.)

Remove the inner door trim panel and the water dam (plastic sheet behind trim.) The forward main window track is also the back edge of the vent window. It will be either rivetted in place (1/4" rivet, drill out with 1/4" bit and replace with 1/4"-20 bolts & nuts) or screwed (probably with 1/4" bolts & nuts.) If you have to get/replace the hardware, I suggest using stainless bolts & nuts, and get the nuts with the Nylon locking collar.

Once you've removed the four fasteners that hold the window assembly in place, run the main window down (if you haven't already,) tip the vent window toward the rear, then toward the outside of the door, and it will lift out.

Installation is the reverse of removal. The functional "smoker windows" may be replaced with the fixed window assemblies, and vice versal