Transmission mount wont line up with cross member
Thread Starter
Seasoned Member
Joined: Dec 2009
Posts: 460
Likes: 1
From: Colorado Springs, CO
Year: 2001
Model: Cherokee
Engine: 4.0L
Transmission mount wont line up with cross member
The dealer lists the mount for $256!?!
No one else lists a transmission mount for my 2001 Cherokee so I got Part Number: 5200233 from NAPA for $25. It's the same part number they sell at various stores online for my Jeep so I thought it must work.
Nope the 4 bolts that mount to the crossmember are offset too much and it doesn't have a hole on the top to accommodate the dimple in the exhaust mounting plate.
All you have to do is drill out the crossmember holes a little and then drill out the dimple in the exhaust mounting plate to create a flat surface.
Just FYI if anyone has a 2001 and orders that part number.
No one else lists a transmission mount for my 2001 Cherokee so I got Part Number: 5200233 from NAPA for $25. It's the same part number they sell at various stores online for my Jeep so I thought it must work.
Nope the 4 bolts that mount to the crossmember are offset too much and it doesn't have a hole on the top to accommodate the dimple in the exhaust mounting plate.
All you have to do is drill out the crossmember holes a little and then drill out the dimple in the exhaust mounting plate to create a flat surface.
Just FYI if anyone has a 2001 and orders that part number.
Thread
Thread Starter
Forum
Replies
Last Post
96Co
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
12
Jan 10, 2024 06:17 AM
joshjeepnoob
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
6
Sep 4, 2015 07:20 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)