Alright i think im going to go ahead and order the 3" daystar mount. Ill let yall know if it fixes the problem. Thanks for all the help fellas!

 

So i installed the poly mount today and i gotta say im glad i did! When i took the stock mount off i could see that it had warped somehow which was causing the noise. The poly mount is very solid and got rid of that annoying power robbing noise. After replacing the mount i did notice a very slight gain in torque. Which is probably because the old mount was twisted. Idk it could just be the butt dyno but it feels much nicer on acceleration lol. It does vibrate quite a bit at idle but it actually vibrates less harsh than my mangled stock mount did. So all in all definitely a good upgrade!

 

Poly mounts cause more vibes, i didn't like it so i took mine off.

 

Double check your T-Case linkage too.
http://www.4x4xplor.com/T-CaseTSB.html

 

sounds good to me, im gunna have to giver a try. hopefully get rid of that annoying noise

 

i had a problem like that and found out the torque converter bolts were loose

 

Apparently your problem was differant cause a tranny mount worked from him,so your problem would be what..........yes differant

 

Where did I say I had the exact same problem, learn to what.... Yes read. Haha

 

My Cherokee has bad vibrations when I back up. That it tho.