1.25" Trailor Hitch wont come out of reciever. I've tried WD40 with the hammer. What do ya think? Log chain and Oak tree? Or, is there an easier way? Also, I don't have oxy torch, just a little propane.

 

I used the log chain method on my Mercedes that got stuck. Just be careful with a rug over the chain for dampening just in case.

 

yup long chain and put some greese in there for next time.

 

I had the same problem with my Grand Cherokee, I used the strap and tree method to not scrape bark off the tree and gouge it up. When I got it out I took a grinder to the insert, in order to not have the problem again...it worked!! BTW, use 4-lo, it's a lot easier to control!!

 

Antiseize is your friend

 

PB blaster

 

I've been using WD-40 every week or so, but this thing won't budge.

 

PB blaster is much better than WD-40 it always breaks bolts free when WD wont work for me but this is a different application so im not sure if it work but i say its worth a try

 

They are not the same. The tree and logging chain will either pull it out or will pull the hitch from under the truck. Give it a try.

 

PB Blaster

Next out comes the old blue wrench.
Heat is a catalyst to rust so a handheld torch with Map gas should work fine.

But then again have a camera ready should you decide to use the brute force way.

 

Tried this one with an 85, I had... Tore the hitch and chunks of the unibody right out from under her... And the stupid hitch stayed in...

 

Tree + strap + hitch + throttle = great video