that should be your frame rail. why do you want tow hooks in the back and not a hitch?

 

those look like the holes for mounting a tow package

 

your top arrow is one and the next hole up is the other, for standard tow hooks.

 

What is a hitch? My Jeep doesn't have towing hooks at all !!

 

those are the hitch mounting bolt holes don't run a hook off those you need to tie in more of the unibody so you don't rip the hooks off the unibody

 

. a trailer hitch....

you'd be better off with hooks in the front and something else in the back.

 

^ what he said. Get your hands on a class 3 hitch and run a d-ring shackle in it.

 

but does this have towing hooks?

 

The pic shows a tow hitch... but not one for your Jeep....

That Jeep had a tow hitch or a gas tank skid plate. on it a one point... Those little square inserts in those holes are where it would have bolted too. The third bolt would have gone where you already have that bolt at the front of the frame area in the picture.

Jeep did offer a simple tow hook bracket that used the back hole in the frame rail and the two in the unibody tail plate....

 

Arab a trailer hitch that is more heavy duty than the one pictured can have a tow hook insert for the center of it and that distributes the pull towards the whole frame and not just one side.

 

here's a hitch, you would want class III
http://www.reeseprod.com/


edit: oops the link didnt go to a cherokke so you will have to find it on there

 

شكرا جزيلا للجميع!!!

 

those be for mountin a reciever hitch