Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here XJ (84-01)
All OEM related XJ specific tech. Examples, no start, general maintenance or anything that's stock.

tire Help

Thread Tools
 
Search this Thread
 
Old 04-01-2010, 01:08 PM
  #1  
Member
Thread Starter
 
Wiegand's Avatar
 
Join Date: Mar 2010
Location: Milton, Florida
Posts: 162
Likes: 0
Received 0 Likes on 0 Posts
Year: 1998
Model: Cherokee
Engine: 4.0L v6
Default tire Help

I got a Jeep Cherokee, 4" Super Lift, currently on 31x10.5 15" rims.

I was told by goodyear 32s should fit, but want to know if 33s will.

Is there an easy way to find out?

Also Do ranger 5 lug rims fit on jeep cherokees?
Old 04-01-2010, 01:12 PM
  #2  
CF Veteran
 
prerunner1982's Avatar
 
Join Date: May 2008
Location: Edmond, OK
Posts: 2,495
Received 2 Likes on 2 Posts
Year: 1993
Model: Cherokee
Engine: 4.0 ltr
Default

Originally Posted by Wiegand
I got a Jeep Cherokee, 4" Super Lift, currently on 31x10.5 15" rims.

I was told by goodyear 32s should fit, but want to know if 33s will.

Is there an easy way to find out?

Also Do ranger 5 lug rims fit on jeep cherokees?
33"s may need some trimming, but I am sure there is someone here who has a similar setup.

The Ranger 5 lugs will fit, but I believe the hub hole may need to be opened up a bit. Here is a list of wheels that "should" fit...

The reason I included the all vehicles with the 5x4.5" bolt pattern is because the center bore may be enlarged to fit the XJ hub, so why not include them.

With Center Bore of 71.5
Make Model Year
Jeep
Wrangler 1987-2006
Grand Cherokee 1993-1998
Liberty 2002-2007

AMC
Eagle Vision XXXX-1993

American Motors
AMX/Pacer/Concord 1960-1985 Not sure on hub diameter

Chrysler
300 1998-2004
Concorde, LXI 1993-2004
LHS, New Yorker 1994-2001
Prowler 1997-2002
Town n Country 1988-2007

Dodge
1/2 ton truck/Van 1949-1985
Full size car 1957-1977 Not sure on hub diameter
Dakota 1987-1990
Intrepid 1993-2004
Nitro 2007-2008
Ramcharger 1975-1985

All with a 5x4.5" bolt pattern but smaller diameter hub holes, in addition to above.

Acura
3.2 CL 1998-2003
3.2 TL XXXX-1996
3.5RL XXXX-1996
Integra Type R 1997-2001
Legend 1991-2005
MDX XXXX-2001
NSX 1991-2005
RL 3.5 1996-2004
RSX 2001-2006
TL 2004-2008
TL 3.2 1996-2003
TSX 2004-2008

Bently
Continental GT 2004+

Chryslter
Conquest TSI 1987-1989
Laser 1990-1994
Sebring LXI 1995-2006
Sebring Conv 2008
Sebring Sedan 2007-2008

Daiwoo
Leganza, Prince 1997

Dodge
Avenger 1995-2001
Avenger 2008
Caliber 2007-2008
Stealth 1991-1996
Stratus 2001-2006

Ford
1/2ton E100 van 1968-1984
1/2 ton F100 1980-1985
Aerostar 1985-1997
Bronco II 1982-1990
Crown Victoria 1991-2007
Custom 1957-1964
Galaxie, LTD 1979-1996
Edge 2007-2008
Escape 2001-2008
Explorer, Sport trac 1990-2008
Five Hundred 2005-2007
Free Style 2005-2007
Fusion 2006-2008
Thunderbird 1965-1972
Maverick 1964-1973
Mustang 1969-1973
Mustang GT/Cobra 1997-2008
Probe 1993-1997
Ranger 1981-1908
Taurus 2008

Honda
Accord V6 1998-2007
Accord 4 & 6 cylinder 2003-2008
Civic 2006-2008
CR-V 1997-2008
Element 2003-2008
Odyssey 1995-2004
Pilot 2003-2008
Prelude 1997-2001
S2000 199-2008

Hyundai
Azera 2006-2008
Elantra 2007-2008
Santa Fe 2001-2008
Sonata 2006-2008
Tiburon 2003-2008
Tucson 2005-2008
Veracruz 2007-2008
XG 300/350 2001-2005

Infiniti
EX35 2008
FX35/45 2004-2008
G35 Sedan 2003-2008
G35 Coupe 2003-2007
G37 2008
I30 1995-1997
I30 & I35 T 1995-2001
I35 2002-2005
J30 1992-1997
M35 2006-2008
M45 2003-2008
Q45 1990-2006

Isuzu
Oasis 1997-2002

Kia
Amanti 2004-2008
Optima 2.4L 2.7L 2007-2008
Rondo LX, EX 2007-2008
Sedona 2002-2008
Sentry 2007-2008
Sportage 2005-2008

Landrover
Freelander 2002-2005

Lexus
ES300 1992-1997
ES330 2004-2006
ES350 2007-2008
GS300 1993-2006
GS350 2007-2008
GS400 1998-2001
GS430 2001-2007
GS450H 2007-2008
GS460 2008
IS 250 2006-2008
IS 300 2000-2005
IS350 RWD 2006-2008
IS F 2008
LS 350 1990-1992
LS 400 1990-2000
LS 430 2001-2006
RX 300 1998-2003
RX 330 2004-2006
RX 350 2007-2008
RX 400H 2007-2008
RX 300 1998-2003
RX 330 2004
SC 300 1992-2000
SC 400 1991-2001
SC 430 2002-2008
SE 330 1991-1997

Lincoln Refer to Ford

Mazda
3 2004-2008
5 2006-2008
6 2003-2008
626 1988-2002
929 1988-1995
B 2500, 3000, 4000 1993-2008
CX-7, CX-9 2007-2008
Millenia 1994-2003
MPV 1989-2006
MX-5 "Miata" 2006-2008
MX-6 1988-1997
Protégé 5 2001-2003
RX-6 1990-1992
RX-7 1993-1996
RX-7 GXL, GTU 1986-1992
RX-8 2004
Tribute 2001-2006

Mercury See Ford

Mitsubishi
3000 GT 1991-1997
Diamante 1991-2004
Eclipse 1989-2008
Endeavor 2004-2008
Galant 1999-2008
Lancer 2004-2008
Outlander 2003-2008
Starion 1986-1989

Nissan
240 SX, SE 1995-1996
300ZX, Turbo 1984-1996
350Z 2003-2008
Alitma 2002-2008
Maxima 1989-2008
Murano 2003-2008
Quest 1993-2008
Rogue 2008
Sentra 2007-2008

Plymouth See Chrysler/Dodge

Scion
XB 2008

Subaru
Impreza 2005-2007
SVX 1992-1997
Tribeca 2006-2008

Suzuki
Grand Vitara 2006-2008
SX4 2007-2008

Toyota
Avalon 1995-2008
Camry 1992-2008
Solara 1999-2008
Cressida 1989-1992
Highlander 2001-2008
MR-2 1990-1995
Pickup 2wd 1980-1995
Previa 1990-1996
Rav 4 1996-2008
Sienna 1997-2008
Supra 1989-1997
Tacoma 2wd (except Prerunner) 1995-2008
Tacoma X-runner 2005-2008

Disclaimer: Though they have the same bolt pattern obviously the back spacing will be different... since I did not have that info I could not include it... use your own judgment.

Last edited by prerunner1982; 04-01-2010 at 01:14 PM.
Old 04-01-2010, 01:34 PM
  #3  
Member
Thread Starter
 
Wiegand's Avatar
 
Join Date: Mar 2010
Location: Milton, Florida
Posts: 162
Likes: 0
Received 0 Likes on 0 Posts
Year: 1998
Model: Cherokee
Engine: 4.0L v6
Default

Trimming as in trimming the fenders?
If so do you know how much that would cost to do perfessionally?
I would do it myself but I don't want to risk messing up and it looking like ****.
Old 04-01-2010, 01:39 PM
  #4  
Seasoned Member
 
Brad M.'s Avatar
 
Join Date: Feb 2010
Location: Utah
Posts: 325
Likes: 0
Received 0 Likes on 0 Posts
Year: 1999
Model: Cherokee
Engine: 4.0
Default

Yes they will fit. Depending on whether or not you unhook your swaybar and actually wheel it, you may or may not need to extend your bumpstops and trim the fenders up. Here's a good picture thread for you to browse, check out these setups;

https://www.cherokeeforum.com/f59/xj...up-thread-260/

Originally Posted by Wiegand
Trimming as in trimming the fenders?
If so do you know how much that would cost to do perfessionally?
I would do it myself but I don't want to risk messing up and it looking like ****.
Don't pay someone to do something you can do yourself. A shop will rape you if you pay them to trim your fenders, not to mention they may butcher it. There are tons of writeups on the forum on fender trimming, look at this page;

https://www.cherokeeforum.com/search...earchid=865535

Last edited by Brad M.; 04-01-2010 at 01:42 PM.
Old 04-01-2010, 01:47 PM
  #5  
Member
Thread Starter
 
Wiegand's Avatar
 
Join Date: Mar 2010
Location: Milton, Florida
Posts: 162
Likes: 0
Received 0 Likes on 0 Posts
Year: 1998
Model: Cherokee
Engine: 4.0L v6
Default

Originally Posted by Brad M.
Yes they will fit. Depending on whether or not you unhook your swaybar and actually wheel it, you may or may not need to extend your bumpstops and trim the fenders up. Here's a good picture thread for you to browse, check out these setups;

https://www.cherokeeforum.com/f59/xj...up-thread-260/



Don't pay someone to do something you can do yourself. A shop will rape you if you pay them to trim your fenders, not to mention they may butcher it. There are tons of writeups on the forum on fender trimming, look at this page;

https://www.cherokeeforum.com/search...earchid=865535

Okay thanks a lot, Them pictures will deffinately help.
I just bought my jeep 2 weeks ago, It came with the superlift already on it, I looked at the website and it was showing a 4" was the lowest they sold, I assumed it was a 4" lift.
I'm going to go see if I can get a serial number to make sure, I just seen they sell 2.5" lifts too, I'm 99% sure it isn't a 2.5 but I better make sure.
I'll figure it out by tonight.

Just need to get my brush guard and winch now.
Old 04-01-2010, 02:10 PM
  #6  
CF Veteran
 
prerunner1982's Avatar
 
Join Date: May 2008
Location: Edmond, OK
Posts: 2,495
Received 2 Likes on 2 Posts
Year: 1993
Model: Cherokee
Engine: 4.0 ltr
Default

Originally Posted by Wiegand
Okay thanks a lot, Them pictures will deffinately help.
I just bought my jeep 2 weeks ago, It came with the superlift already on it, I looked at the website and it was showing a 4" was the lowest they sold, I assumed it was a 4" lift.
I'm going to go see if I can get a serial number to make sure, I just seen they sell 2.5" lifts too, I'm 99% sure it isn't a 2.5 but I better make sure.
I'll figure it out by tonight.

Just need to get my brush guard and winch now.
Post a pic of yours if you can..... should be pretty easy to tell if it is a 2.4" or 4" lift.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
2heapjeeps
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
13
10-04-2015 10:52 PM
xltom
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
9
09-19-2015 01:37 PM
Spinich
Jeep Builds
9
09-18-2015 01:34 PM
mitchbacon12
Modified XJ Cherokee Tech
3
09-15-2015 08:01 PM
2heapjeeps
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
2
09-07-2015 11:30 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 


Quick Reply: tire Help



All times are GMT -5. The time now is 04:47 PM.