Tips on troubleshooting no start condition
Thread Starter
Newbie
Joined: Apr 2008
Posts: 1
Likes: 0
Tips on troubleshooting no start condition
OK so the deal is, my jeep has been rough to start and now doesnt start every time i try to get it going. It either does start or I hear a very very faint whir for a few seconds then nothing. I know it is either the starter, solenoid, or ignition ?sensor?. I need to know how to test the starter and solenoid and if anyone has tips for removing the starter/solenoid.
1996 Jeep Cherokee I6, new cps, ignition coil, spark plugs, rotor, battery.
1996 Jeep Cherokee I6, new cps, ignition coil, spark plugs, rotor, battery.
Newbie
Joined: Apr 2008
Posts: 12
Likes: 0
From: Littleton CO
Year: 1997
Model: Cherokee
Engine: V6 4.0 L
my jeep did the same thing!
i got it fixed there is a wire or senser where the DNR123 gears are and just put the key in and pull it back in forth!
it just doesnt read that it is in park! witch makes it not turn over!
it just doesnt read that it is in park! witch makes it not turn over!
Newbie
Joined: Apr 2008
Posts: 12
Likes: 0
From: Littleton CO
Year: 1997
Model: Cherokee
Engine: V6 4.0 L
is it automatic or stick? this just happened to mine this week.
it was the neutral switch floor automatic shifter. just loose
it doesnt read if it is in park or neutral so that makes it not start!
let me know how that works?
it was the neutral switch floor automatic shifter. just loose
it doesnt read if it is in park or neutral so that makes it not start!
let me know how that works?
Thread
Thread Starter
Forum
Replies
Last Post
CCKen
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
3
Aug 20, 2015 08:07 PM
Rad Vlad
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
7
Aug 20, 2015 07:44 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)