Threaded rods holding upper and lower rad supports?
#1
CF Veteran
Thread Starter
Join Date: Jan 2014
Location: District of Columbia
Posts: 1,287
Received 274 Likes
on
205 Posts
Year: 1998
Model: Cherokee (XJ)
Engine: 4.0
Threaded rods holding upper and lower rad supports?
I'm not sure what these little threaded rods are called, but I just snapped one trying to get the little nut off the top. There are 4 of them, and they hold the upper and lower parts of what I call the radiator support, for lack of a better term. The lower end is L-shaped, and the top has a small 8mm nut on the end.
Are these things available anywhere? If not, is there an easy way to fab up a replacement?
Here's what I'm trying to do. I'm trying to separate the condenser far enough from the radiator so that I can slide through those plastic lock anchors for the aux trans cooler I'm mounting. I need to get the upper radiator support thingy (green arrows) lifted up enough so that the tab will clear the mounting bolt on the condenser (yellow arrow). I can't do that without removing those damn long threaded rods (red arrows), even with the main mounting bolts on the end (blue arrows) removed.
Are these things available anywhere? If not, is there an easy way to fab up a replacement?
Here's what I'm trying to do. I'm trying to separate the condenser far enough from the radiator so that I can slide through those plastic lock anchors for the aux trans cooler I'm mounting. I need to get the upper radiator support thingy (green arrows) lifted up enough so that the tab will clear the mounting bolt on the condenser (yellow arrow). I can't do that without removing those damn long threaded rods (red arrows), even with the main mounting bolts on the end (blue arrows) removed.
Last edited by IJM; 04-17-2017 at 10:28 PM.