While replacing the valve cover gasket today I had a hell of a time with those darn grommets !!
UNTIL I took my electric heatgun and warmed them ever so slighty, They softened right up and was then very easy to re-install..
Just an FYI !!!
The Valvecover gasket replacment took me 2 hrs total time, Cost $30.00 for the gasket at Autozone !
! Not a bad little job at all if your thinking about it Do It !!
UNTIL I took my electric heatgun and warmed them ever so slighty, They softened right up and was then very easy to re-install..
Just an FYI !!!
The Valvecover gasket replacment took me 2 hrs total time, Cost $30.00 for the gasket at Autozone !
! Not a bad little job at all if your thinking about it Do It !!
Senior Member
Quote:
UNTIL I took my electric heatgun and warmed them ever so slighty, They softened right up and was then very easy to re-install..
Just an FYI !!!
The Valvecover gasket replacment took me 2 hrs total time, Cost $30.00 for the gasket at Autozone !
! Not a bad little job at all if your thinking about it Do It !!
Yes mine needs one, and thanks for the tip.Originally Posted by milmat1
While replacing the valve cover gasket today I had a hell of a time with those darn grommets !! UNTIL I took my electric heatgun and warmed them ever so slighty, They softened right up and was then very easy to re-install..
Just an FYI !!!
The Valvecover gasket replacment took me 2 hrs total time, Cost $30.00 for the gasket at Autozone !
! Not a bad little job at all if your thinking about it Do It !!
CF Veteran
what gasket did you get? when i got my felpro it came with some cheezy plastic grommets that were useless....