is this thing supposed to be doing this? ACK!
01-18-2011, 12:41 AM
#1
Member
Thread Starter
Join Date: Jan 2011
Location: Temecula C.A.
Posts: 125
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1992
Model: Cherokee
Engine: 4.0
is this thing supposed to be doing this? ACK!
hey kids! so im not sure if this is supposed to do this!
92 2 door 4.0 ax/15 tranny i belive.
these are the pressure lines for the clutch slave cylinder. im just not sure that they should be moving freeley like that. none of my manuals even show those lines.
thanks in advance.
also if not anyone have a pic of what its supposed to look like?
Cheers!!!
92 2 door 4.0 ax/15 tranny i belive.
these are the pressure lines for the clutch slave cylinder. im just not sure that they should be moving freeley like that. none of my manuals even show those lines.
thanks in advance.
also if not anyone have a pic of what its supposed to look like?
Cheers!!!
01-18-2011, 12:48 AM
#2
Senior Member
Join Date: Feb 2009
Location: Highlands Ranch Co.
Posts: 717
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1985 shell
Model: Cherokee
Engine: 1996 6 cylinder Briggs & Stratton
Normal,,,I used a wire tie to hold it away from the transfer case shifter. Not tight, just enough to keep it from rubbing on anything!
01-18-2011, 01:54 AM
#5
Member
Thread Starter
Join Date: Jan 2011
Location: Temecula C.A.
Posts: 125
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1992
Model: Cherokee
Engine: 4.0
Thread
Thread Starter
Forum
Replies
Last Post
rdr8887
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
11
01-27-2020 09:24 AM
NM-XJ
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
18
10-23-2018 04:21 PM
lpresnell
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
5
09-08-2015 10:59 AM
Cherokee_Mike
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
3
09-05-2015 09:28 AM
2000JGC
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
1
09-03-2015 09:53 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)