temp control gauge
10-11-2016, 05:48 PM
#1
Newbie
Thread Starter
Join Date: Jul 2014
Location: Coalmont, TN. Grundy co.
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1999
Model: Cherokee
Engine: 4.0
temp control gauge
I am having a hard time locating my temp gauge wire on the engine. It's 99 Jeep Cherokee classic 4×4. 4.0 straight 6. My temp gauge and oil gauge are not working. Everything else works fine. I took dash out and made sure everything was good, clean, and had good connections. Any help on resolving this issue would be great. Or a quick easy way to wire up new additional gauges for both.
10-11-2016, 07:16 PM
#2
Senior Member
Join Date: Sep 2014
Location: Saginaw Mi area
Posts: 580
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1994
Model: Cherokee
Engine: 4.0
Do you know if the two gauges have the 12 volt power to them, when the ignition is on ? I assume you checked the fuses (?)
Having both not working suggests that the problem is common to both gauges, which I believe would be the 12 volt power source they need to work...
Not likely that the sensors/senders for both gauges would be a problem at the same time..
Another item that may be a problem is a connector in the wiring for the gauges that don't work...
Having both not working suggests that the problem is common to both gauges, which I believe would be the 12 volt power source they need to work...
Not likely that the sensors/senders for both gauges would be a problem at the same time..
Another item that may be a problem is a connector in the wiring for the gauges that don't work...
Thread
Thread Starter
Forum
Replies
Last Post
Prizice
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
23
08-26-2016 05:35 PM
viperbabe35
Miscellaneous
0
08-22-2016 12:45 PM
Robert_7200
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
3
08-17-2016 07:40 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)