My jeep threw a code for the torque converter clutch solenoid, so I pulled the trans pan to replace with a new one I bought. I looked for hours and could not find where this part goes. I may have been blind, or just lost, but never ended up finding it. After checking all kinds of threads and googling I still have not been able to find a definite answer to where this goes. Anybody have a solid answer? I need to get it swapped out soon so I can get back on the road!!! Thank you for any and all info!
Member
It is located on the valve body, once you remove the pan and filter you have complete access the valve body and then you will see the solenoids in there it is a super super easy job!!
Good luck I found the info in about 3mins
Good luck I found the info in about 3mins
Unless I was sent the wrong part, the solenoid I got will not wire up to any of these, that's what I couldn't understand, I will post a pic of the one I got
CF Veteran
Quote:
You probably got an A340E/F transmission solenoid that has a seperate ground wire. It needs to be connected to the solenoid mount bolt.Originally Posted by ausrich
Unless I was sent the wrong part, the solenoid I got will not wire up to any of these, that's what I couldn't understand, I will post a pic of the one I got