taken my doors off- ne1 kno somthin i dont?
#1
Junior Member
Thread Starter
Join Date: Apr 2009
Posts: 59
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1991
Model: Cherokee
Engine: 4.0. High Output
taken my doors off- ne1 kno somthin i dont?
91 cherokee 4 dr
is ther some kind of clip i can put the wires on for easy on and off doors? i got power windows and power locks so thers alot of wires
any kind of special hinge i can buy thats not as much of a pain to get the doors on and off?
is ther some kind of clip i can put the wires on for easy on and off doors? i got power windows and power locks so thers alot of wires
any kind of special hinge i can buy thats not as much of a pain to get the doors on and off?
#2
Senior Member
Join Date: Jan 2009
Posts: 545
Likes: 0
Received 1 Like
on
1 Post
Year: 1994
Model: Cherokee
Engine: 4.0L Air Intake and TB Spacer
For the doors, have you taken them off yet? If not I acually found it easier to take the torx bolts off then cut the hinges. If you have them off already, I haven't heard of any special hinge, but the more you take them on and off they get easier. I also changed the pin to a 1/4 grade 8 bolt and tacked them in place. It still lines up fine.
#3
Junior Member
Thread Starter
Join Date: Apr 2009
Posts: 59
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1991
Model: Cherokee
Engine: 4.0. High Output
nah ther not off yet, but u found this write up
http://heavymetalxj.wordpress.com/2007/08/03/6/
u did the same?
looks pretty good to me, but im not ditchen my electrical like he did
http://heavymetalxj.wordpress.com/2007/08/03/6/
u did the same?
looks pretty good to me, but im not ditchen my electrical like he did
#5
Senior Member
Join Date: Jan 2009
Posts: 545
Likes: 0
Received 1 Like
on
1 Post
Year: 1994
Model: Cherokee
Engine: 4.0L Air Intake and TB Spacer
Yeah I pretty much did the same. I passenger side tripped me out since the pins are in up side down, but other than that it was good. I tried to dremal it first, but after hours of doing that I just undid the torx bolts.
#6
nah ther not off yet, but u found this write up
http://heavymetalxj.wordpress.com/2007/08/03/6/
u did the same?
Looks pretty good to me, but im not ditchen my electrical like he did
http://heavymetalxj.wordpress.com/2007/08/03/6/
u did the same?
Looks pretty good to me, but im not ditchen my electrical like he did
#7
Member
Join Date: Apr 2009
Posts: 130
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1989
Model: Cherokee
Engine: 4.0
Im not too sure about my info but all the guys i wheel with say you need to reinforce the unibody due to doors being part of the structural integrity if the xj. It doesnt make much sence to me but i can see it if you plan on flexing it really hard. I drove my 89 4 door up an RTI ramp and i couldnt open any of the doors (yes i was stuck inside)
Trending Topics
#8
same thing happened to my wife's elantra when she slid into a ditch lol she called me telling me she crashed and couldnt get out of the car, i was expecting it to be upside down when i got there lol.
but ya some frame stiffeners should be in order if you wanna go doorless, dont need a cracked weld or a window popping out on the e-way
but ya some frame stiffeners should be in order if you wanna go doorless, dont need a cracked weld or a window popping out on the e-way
#9
Member
Join Date: Apr 2009
Posts: 130
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1989
Model: Cherokee
Engine: 4.0
same thing happened to my wife's elantra when she slid into a ditch lol she called me telling me she crashed and couldnt get out of the car, i was expecting it to be upside down when i got there lol.
but ya some frame stiffeners should be in order if you wanna go doorless, dont need a cracked weld or a window popping out on the e-way
but ya some frame stiffeners should be in order if you wanna go doorless, dont need a cracked weld or a window popping out on the e-way
thats funny sh** right there i dont care who you are
get-r-done
#10
should have been there 60gritt, she was just sitting in the back seat staring out the window like a kid that got left in the car at the grocery store lol poor girl, i dont think she'll ever live it down.
#11
Junior Member
Thread Starter
Join Date: Apr 2009
Posts: 59
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1991
Model: Cherokee
Engine: 4.0. High Output
thanks for all the help guys, if i take the bulb out of the interior light for when my doors are off is it still gona drain on the battery?
and how much of a pain is it to add support- do i need it if im just planning on on-road driving with out the doors?
and how much of a pain is it to add support- do i need it if im just planning on on-road driving with out the doors?
#14
#15
Seasoned Member
Join Date: Apr 2009
Location: Northeast PA
Posts: 288
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1997
Model: Cherokee
Engine: 4.0, k&n intake Flomaster cat back