Swapping manual doors into electric xj
#1
Newbie
Thread Starter
Join Date: Jun 2013
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
Swapping manual doors into electric xj
ok so I couldn't find any doors for my 2dr xj and finally found a pair but the are manual and my doors are electric. my question is if everything from the electric would bolt into the manual?????
thanx guys
thanx guys
#3
CF Veteran
Join Date: Mar 2011
Location: California
Posts: 2,570
Likes: 0
Received 4 Likes
on
4 Posts
Year: 1992
Model: Cherokee
Engine: 4.0 HO
Yes and no. They don't use bolts, they use rivets. You can drill out all the rivets and swap the parts and either find bolts you can make work or rivet it.
#4
CF Veteran
Yes also.... my xj came with power windows... the passenger didn't work so I made them to manuals... girl hates it but whatever
The regulators were basically held on the door frame with self tap screws and rivets...
The regulators were basically held on the door frame with self tap screws and rivets...
Thread
Thread Starter
Forum
Replies
Last Post
Bucko
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
2
11-04-2018 09:52 PM
riderjay253
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
4
09-16-2015 11:31 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)