Suitable UCA bolt replacements?
04-30-2012, 02:59 PM
#1
CF Veteran
Thread Starter
Suitable UCA bolt replacements?
Alright so I just found out the source of one of my clunking noises. Axle end UCA bolt was really loose. Because of the slop in it the threads on the bolt are all buggered up so I replaced it with a grade 5 bolt that I found in the shop. So whatcha guys think, is grade 5 strong enough? BTW this is on an '89 with the torx head bolts.
04-30-2012, 03:40 PM
#2
Member
Join Date: May 2010
Location: Newport News,VA
Posts: 196
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1992
Model: Cherokee (XJ)
Engine: 4.0L I6 H.O.
I personally used grade 10.1 or whatever the highest metric grade is.
It has held up pretty good. 8$ for bolts and nuts for both sides.
Axle end at least.
**** those torx asses.
It has held up pretty good. 8$ for bolts and nuts for both sides.
Axle end at least.
**** those torx asses.
Thread
Thread Starter
Forum
Replies
Last Post
Aryl
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
10
04-10-2019 09:07 AM
nicksan
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
47
10-06-2015 02:09 PM
Doogluus88
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
7
09-01-2015 06:11 AM
Blue04
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
3
08-29-2015 12:29 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)