Stud Pattern / measurment
#1
Member
Thread Starter
Join Date: Aug 2009
Location: Auckland, NEW ZEALAND
Posts: 101
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2001
Model: Cherokee
Engine: 4.0
Stud Pattern / measurment
can anyone confirm that my 01'XJ with a Dana35 rear, has a stud pattern of 5/127??
My other options are 5/114, or 5/139.7??
Just about to order new rims, and I don't want to '**** up' the order......
Cheers for any help....
My other options are 5/114, or 5/139.7??
Just about to order new rims, and I don't want to '**** up' the order......
Cheers for any help....
#5
Member
Thread Starter
Join Date: Aug 2009
Location: Auckland, NEW ZEALAND
Posts: 101
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2001
Model: Cherokee
Engine: 4.0
Thank you for your help gentlemen...
I wasn't to sure where to measure from, as some articles state measurements are from the outside of one hole and measure to the center of the hole second to the left (or right).
Others state that the mesurement should be from the center of one hole, to the opposite PCD (Pitch Circle Diameter) which gives a slightly different measurement.
On your recommendations, I wil order 5/4.5 rims....
Cheers for the assistance
I wasn't to sure where to measure from, as some articles state measurements are from the outside of one hole and measure to the center of the hole second to the left (or right).
Others state that the mesurement should be from the center of one hole, to the opposite PCD (Pitch Circle Diameter) which gives a slightly different measurement.
On your recommendations, I wil order 5/4.5 rims....
Cheers for the assistance
Thread
Thread Starter
Forum
Replies
Last Post
Crimmy
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
8
10-01-2015 06:43 PM
pantallica20@aol.com
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
3
09-26-2015 07:05 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)