jeepster96

I put a 89 waggy 44 in the front my jeep and i was wondering if it would work, the u joints fit but i want to know if it long enough. with jeep level, there is about 7/8 inch gap. will that be enough, if so would it be worth rebuilding the shaft with new joints or buy a complete new one wich i rather not at the moment do to the money i just put in to it

jeepster96

oh yeah i forgot 5.5 lift with 33s. and what should i do about the rear shaft it will get the rear d44 out of the waggy. hack an tap with stock front xj shaft or have one made? thanks

goblazers_6

I'm running the stock shaft at ~7" with my waggy 44. I carry a spare. If it doesnt work out for you, then build a new one.

jeepster96

sweat. thanks

jeepster96

did you have one built for the rear? hack an tap or sye?

goblazers_6

i have an MJ, so no need for a SYE, I just had a longbed shaft shortened, I'm running the stock MJ 44 in the rear.

Here is my build thread.
https://www.cherokeeforum.com/f46/mi...rincess-19758/

ktmracer419

do you have shortarms or longarms?