Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here XJ (84-01)
All OEM related XJ specific tech. Examples, no start, general maintenance or anything that's stock.

Stalling, Need Specs for Diagnosis

Thread Tools
 
Search this Thread
 
Old Feb 8, 2011 | 10:46 AM
  #1  
nagosnell's Avatar
Thread Starter
Newbie
 
Joined: Feb 2011
Posts: 8
Likes: 0
Model: Cherokee
Default Stalling, Need Specs for Diagnosis

My 98 4.0 Cherokee (little) has developed a stumbling issue. This usually occurs more when the truck has been sitting for a couple of hours (as opposed to sitting all night). If I'm accelerating slowly, at about half throttle and at low rpm's, the Jeep stumbles and sounds if though it is backfiring through the intake. I'm guessing this because the backfiring doesn't seem to be coming out of the tailpipe. If I give it more gas, the truck takes off and the stumbling goes away. I replaced a leaky intake/exhaust manifold gasket and then replaced the O2 sensors because of an engine code. The stumbling actually seemed to get worse after the code was reset by a diagnostic tool.

I'm going to check the fuel pressure, plug and plug wires. Does anyone have the fuel pressure specs and plug wire resistance specs?

Thanks.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
ra.stewart
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
9
Feb 15, 2021 01:47 PM
TNXJsleeper
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
1
Oct 2, 2015 08:04 PM
Endlessknight
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
4
Sep 26, 2015 03:20 PM
Joshuapn
Other Vehicles. Other Jeep models & cars and trucks of other makes
1
Sep 25, 2015 08:16 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT -5. The time now is 09:17 AM.