On the plugs I traced them and they go to the same spots on both. Might have to go to a parts or tranny place and check both cables out and see if the part in the trans section is different.

 

Connections where plug connect are different on bottom of pic. circuit boards connectins are differen

 

What are you trying to accomplish ?

 

Well this one was given to my wife cause we are tight on cash and the old one the plastic of the circuit board is all off and the brass is touching everything. But I can go to the junkyard and pull that plug and install it on my wiring. That parts pretty easy.

 

You could but still got cable issue to remedy ....

 

Yeah might have to have one made. But will check out the parts if I can find the parts for making speedo cables I could do it.

 

Turn it around a post a pic of front this say up to 90will work just have to get different cable. Maybe that 91 and up I can tell from front.... http://comancheclub.com/topic/31226-gauge-cluster/

 

This is what you need cluster with reset button in gauge .....

 

The one with out plastic is my old one. The one that has the cover still on it is the new one.

 

Not sure why its double posting the pics.

 

Opps. Wrong thread.

 

Hard to tell with the glare is this button in gauge face or out side of it you need one thats in the gauge. That's Renix

 

The odometer reset is sticking out of the plastic like my old one.

 

That's 91 and up according to that link no work...

 

Wow shut up. I was told it was 86 and up OK thanks.