slight problem with rpm gauge
#1
Seasoned Member
Thread Starter
Join Date: Jun 2011
Location: Los Angeles
Posts: 498
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996
Model: Cherokee
Engine: 4.0 H.O.
slight problem with rpm gauge
As of late I've been noticing my rpm's are sitting at almost 0 sometimes during idle in park or in drive at a stop lights. The Jeep does not feel like it's going to die on me at all idles really strong, no sputters or struggling and only happens after it's warmed up and been driven a few miles. Otherwise, she idles at 500-750rpm after not being driven for a few hours and sounds exactly the same as when she idles at "near zero rpm" according to the rpm gauge. While driving and accelerating, my rpms look fine when shifting with my AW4. When it idles near 0 i will kill the engine and the rpm gauge won't even drop it's that low when shut off, restart and have the same "low idle" problem.
I cleaned my IAC about 2000 miles ago when I installed my bored TB.
Other than that i'm not sure if i have a lazy needle or a bad sending unit? What are your thoughts?
I cleaned my IAC about 2000 miles ago when I installed my bored TB.
Other than that i'm not sure if i have a lazy needle or a bad sending unit? What are your thoughts?
Thread
Thread Starter
Forum
Replies
Last Post
Blackcherokee290
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
27
07-26-2022 07:52 PM
RunnerInPink
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
25
10-10-2017 10:34 AM
rdr8887
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
33
08-08-2017 07:28 AM
EBowen95
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
49
08-25-2015 08:44 PM
Gtrsrlly
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
5
08-25-2015 11:50 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)