seats?
#1
Senior Member
Thread Starter
Join Date: Sep 2008
Location: pa
Posts: 772
Likes: 0
Received 5 Likes
on
3 Posts
Year: 2000
Model: Grand Cherokee
Engine: 4.0
seats?
what year cherokee seats will bolt right into a 96,are there any grand cherokee or other seats that will bolt in? if not any suggestions on good seat covers or a way to help dirty seats look good?thanks
#2
Seasoned Member
Join Date: Apr 2008
Location: Reed City, Michigan
Posts: 496
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996
Model: Cherokee
Engine: 4.0
i kinda had this same question those 89 seats i picked up should bolt in my 01 right?
i think they are all the same but im not sure(im not afraid to make some adaptors either though)
i think they are all the same but im not sure(im not afraid to make some adaptors either though)
#3
CF Veteran
Join Date: May 2008
Location: Bristol,Pa
Posts: 5,188
Likes: 0
Received 6 Likes
on
6 Posts
Year: 94
Model: Cherokee
Engine: 4.0L
The XJ seat braces that attach to the floor changed with the 95 model year. (front hardware runs horizontal vs vertical through floor.
WJ seats are a bolt in on a 95+ XJ and ZJ seats are pretty easy to get in also. Both of these seats are a tad wider though.
I'll see if i can link some writeups after work.
WJ seats are a bolt in on a 95+ XJ and ZJ seats are pretty easy to get in also. Both of these seats are a tad wider though.
I'll see if i can link some writeups after work.
#5
Seasoned Member
Join Date: May 2008
Location: Nor Cal
Posts: 253
Likes: 0
Received 0 Likes
on
0 Posts
Year: Gone but not forgotten
Model: Cherokee
Engine: 4.0
Early limiteds also had the horizontal bolt in's same as the grands manual or electric are the same , I switched to manual grand seats in mine, had the limited electric to start. lost about 50lbs on the swap
Thread
Thread Starter
Forum
Replies
Last Post
Freakn
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
52
10-04-2015 06:34 AM
TNXJsleeper
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
1
10-02-2015 08:04 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)