Seat swap and seat wiring
#1
Newbie
Thread Starter
Join Date: May 2012
Location: Edisto Beach, SC
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1994
Model: Cherokee
Engine: I6
Seat swap and seat wiring
I swapped 1992 leather Grand Cherokee motorized seats into my 1994 Cherokee. It was not a direct swap by any means. Bolt patterns are very different in the floor and seat to base. I made a flat adapter out of 1.5 inch flat bar.
My burning question - what are the green and black wires coming out of the floor under the drivers seat at the seat belt? They don't seem to be for seat belt sensor and aren't showing voltage. I would like to use them for power for fore and aft travel.
My burning question - what are the green and black wires coming out of the floor under the drivers seat at the seat belt? They don't seem to be for seat belt sensor and aren't showing voltage. I would like to use them for power for fore and aft travel.
Thread
Thread Starter
Forum
Replies
Last Post
Ye Ol' Cherokee
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
8
10-09-2015 10:29 PM
neocracka
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
8
09-05-2015 06:50 PM
gwthamm
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
3
09-04-2015 11:29 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)