Any info on Dakota rear add a leaf for a 90 XJ ?

 

i moved your post as i want to keep that setup thread clean with only XJ lift setups.

to the topic, what info exactly are you looking to get about the dakota/s10 bastard pack?

-Kyle

 

What years and which ply. --Shawn R

 

the majority of people go with the s10 packs from a 95 s10.

-Kyle

 

The complete set - main ? Shawn R

 

if you just want a small amount of lift (2-") you can just use the main, but many people mix and match them to gain a very broad range of lift heights.

largely its a mix and match thing.

-Kyle

 

I have access to many different sets because I work at a salvage yard in Stoystown. Thanks.--Shawn R

 

not a problem at all

-Kyle

 

it does NOT have to be a specific year make or model.

anything with a decent arch and 2.5" wide will work.

comanche/s-10/dakota, etc.

some even use the leafs from half ton trucks, but they tend to be thicker, stiffer and less flexy under a 1/4 ton cherokee.

 

how are these add a leafs kits from pro comp? price is good.
http://www.summitracing.com/parts/EXP-13120/

 

wow... google man... theres probly 50 threads about this... hold on ill give you one i got thats forever long...

 

https://www.cherokeeforum.com/f2/dakota-s10-lift-springs-modified-xj-18317/

Here ya go!

 

Just get the four leaf packs from an 80s or 90s S10, the ones with the flat leave in the bottom. XJ main + bottom three of S10 gets 4". Cutoff the eyes of the S10 main and use it for 5"

 

 

yeah i dont understand that chart... cant make sence of the measurements A/B part for some reason? and then itll say like 63" really big next to the vehicle make... im guessin eye to eye? yeah im just lost on that for some reason...