rusted Rear Floor and Shackel Mount.
04-15-2012, 07:58 PM
#1
Junior Member
Thread Starter
Join Date: Jul 2009
Posts: 95
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1999
Model: Cherokee
Engine: 4.0L 242
rusted Rear Floor and Shackel Mount.
last summer My Rear Shackel Rusted up Through the Floor board. Now Trying to fix It. I took off Rear Bumper Cancer Spread though it too.
I was thinking about putting the Square steal though the unibody Frame and building my own shackel mount and Bumper and Doing the same for the other side but keeping the same shackel mount.
Shackel on other side is not salvagleble. and going to have to replace that back floor too. Near the side with gas take filler around the half of the wheel well. wondering if anyone has done anything like this before.
I was thinking about putting the Square steal though the unibody Frame and building my own shackel mount and Bumper and Doing the same for the other side but keeping the same shackel mount. Shackel on other side is not salvagleble. and going to have to replace that back floor too. Near the side with gas take filler around the half of the wheel well. wondering if anyone has done anything like this before.
Last edited by smitysjeep4x4; 04-17-2012 at 11:27 AM.
Thread
Thread Starter
Forum
Replies
Last Post
mtoskippy
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
0
09-03-2015 09:21 AM
RickJames Bish
Modified XJ Cherokee Tech
5
09-02-2015 03:22 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)