eggdashure

Hey guys,

I just found a set of Rubicon Express Control Arm Drop Brackets on Craigslist for $100 shipped. What I didn't know was that it was just the brackets and braces, no bolts or crush sleeves.

I couldn't find a kit on RE's website so I was hoping maybe someone out there still has their instructions and/or knows the sizes I would need to install this setup?

Would be much appreciated!

freegdr

search for the parts list on line

xjmarc

Without the braces you don't want to run them. You take the chance of tearing them off if you hit a good size bump or if you wheel it.

b4wheeler

Part # RE9900

freegdr

not loading

freegdr

ifound the list im trying to post it

freegdr

go to google a nd type in rubicon express control arm drop brackets hard ware kit it the secon one down

freegdr

go to google type in rubicon express control arm drop brackets hardware kit its the second one down

xjmarc

9905 Braces are on RE's site for 85 bucks.

freegdr

thats the rear brace the kits like 250

eggdashure

I have the braces. All I need is the "nut's n' bolts".

Thanks freegdr...for future reference for anyone that may come across this:
http://www.greatlakesxj.com/tech/RE9900-9905.pdf

1 Hardware bag kit with:
4 3/8 x 18 x 1.25” Hex bolts
8 3/8 Flat washers
4 3/8x18 Lock nuts
2 10mm x 75mm Hex bolts
2 10mm Top lock nuts & washers
8 ½” Washers
2 1/2”x13 Lock nuts
2 9/16x12 Lock nuts
2 1/2 x 13 x 3.5” Hex bolts
2 9/16 x 12 x 4.5” Hex bolts

freegdr

google it to there is some spacers not on that list the one on google is the rubicon paper in pdf form

xjmarc

Sorry misread, been up since 5:30 this morning and prob should go to bed. You could prob get all that stuff at tractor supply or lowes a good bit cheaper.

eggdashure

Yea, I have a Lowe's right across the street from my work. I'll be heading there soon. As for the crush sleeve's, I'm just thinking about getting some fence post and cutting it to size. I don't think it will rattle because it is designed to have pressure on it, right? If it does rattle I could just get a couple fat washers that fits the inside diameter of the fence post. I dunno, that's what my crazy mind came up with!