Rough Idle Problem Cherokee XJ 1997 4.0
06-20-2011, 06:10 AM
#1
Newbie
Thread Starter
Join Date: Jun 2011
Posts: 19
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
Rough Idle Problem Cherokee XJ 1997 4.0
Hi Guys,
This is my first post here. I am a Jeep YJ veteran and recently I have bought an european '97 Cherokee, so I can have a happy jeep family. This seemed like a good point to join the forum, since I got my first issue I can't fix myself.
The Jeep runs a bit rough on idle, shakes a bit and drives me crazy.
What have I done:
1. I changed the spark plugs, wires, rotator cap etc.
2. I cleaned the throttle and changed the IAC motor
3. I ran an injector treatment through the gas tank (after it started happening)
No luck. Thats about all my knowledge on the topic, and seems that the above did help most people with similar issues.
I recorded a clip of the idle here:
Thanks all!
This is my first post here. I am a Jeep YJ veteran and recently I have bought an european '97 Cherokee, so I can have a happy jeep family. This seemed like a good point to join the forum, since I got my first issue I can't fix myself.
The Jeep runs a bit rough on idle, shakes a bit and drives me crazy.
What have I done:
1. I changed the spark plugs, wires, rotator cap etc.
2. I cleaned the throttle and changed the IAC motor
3. I ran an injector treatment through the gas tank (after it started happening)
No luck. Thats about all my knowledge on the topic, and seems that the above did help most people with similar issues.
I recorded a clip of the idle here:
Thanks all!
Thread
Thread Starter
Forum
Replies
Last Post
Blackcherokee290
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
27
07-26-2022 07:52 PM
rdr8887
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
7
08-24-2015 07:48 AM
Tj Cope
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
2
08-22-2015 12:51 PM
Kevin Icenhour
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
2
08-21-2015 08:22 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)