rough idle
#1
Junior Member
Thread Starter
Join Date: Jun 2011
Location: Colorado City
Posts: 30
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1990
Model: Cherokee
Engine: 4.0
rough idle
ok fellas ive got a 96 Cherokee, after doing tome repairs to it I have a hard start and a rough idle, I replaced the crank position sensor and now the throttle position sensor. thought the tps would solve my problem but no. when trying to crank it over I get a weird sound that I cant even begin to explain, when it does start it will run great for a sec then the rpm's fall and it starts to shutter and run like crap with a slight miss. any ideas?
#2
CF Veteran
Join Date: Jan 2015
Location: Minnesota
Posts: 2,152
Likes: 0
Received 7 Likes
on
7 Posts
Year: 1999
Model: Cherokee
Engine: 4.0L
ok fellas ive got a 96 Cherokee, after doing tome repairs to it I have a hard start and a rough idle, I replaced the crank position sensor and now the throttle position sensor. thought the tps would solve my problem but no. when trying to crank it over I get a weird sound that I cant even begin to explain, when it does start it will run great for a sec then the rpm's fall and it starts to shutter and run like crap with a slight miss. any ideas?
#3
Junior Member
Thread Starter
Join Date: Jun 2011
Location: Colorado City
Posts: 30
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1990
Model: Cherokee
Engine: 4.0
ive had it a yr, wheeled it once and the motor mounts bolts sheered off in the block, just got it up and running again, I had to put a new distributor in it after the block fell it broke the distributer shaft. it has msd ignition and wires, but im not sure how old they are. the throttle body has some build up in it as well.
#4
CF Veteran
Join Date: Jan 2015
Location: Minnesota
Posts: 2,152
Likes: 0
Received 7 Likes
on
7 Posts
Year: 1999
Model: Cherokee
Engine: 4.0L
ive had it a yr, wheeled it once and the motor mounts bolts sheered off in the block, just got it up and running again, I had to put a new distributor in it after the block fell it broke the distributer shaft. it has msd ignition and wires, but im not sure how old they are. the throttle body has some build up in it as well.
#7
Junior Member
Thread Starter
Join Date: Jun 2011
Location: Colorado City
Posts: 30
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1990
Model: Cherokee
Engine: 4.0
Ok so my problem ended up being my cps. Had to magnetic pull at all! ( that's what I get for buying a cheap cps) oem and it runs like a champ again!
Thread
Thread Starter
Forum
Replies
Last Post
Jamesmon4
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
1
08-16-2016 09:04 PM
Tcq192
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
7
10-23-2015 09:25 AM
15XJ
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
7
09-10-2015 11:17 PM
Bankerburt
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
0
09-08-2015 10:29 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)