Hey guys just wondering if there is a way to pop these out, I am taking out the interior to bedline it and I dont know what to do. I am running out of time!

 

I cut the carpet around them then took them off with a grinder

You could probabaly drill them out once the carpet is out.
Get that carpet out asap, youll probabaly find water under it or dampness, I know I did

 

Yeah infront of my passenger seat I was able to punch a hole in the floor, welding in a patch tomorrow, then im going to monstaline it

 

where is it riveted in? my carpet came right out minus the little hooks in the hatch floor, and i just jerked them out by hand

 

i drilled out rivets in hatch with carpet in

 

Thanks guys, I did what xj_maniac_newb said...Great wording by the way lol

 

should be able to just pull them out with a little tug.

 

My scene when I removed the rug: water, rust and holes...

Not sure why, but pics are upside down...? :/

 

patch holes
get it good and dry, scuff the new metal heavily with 50 grit.

wipe it all down with mek or xeylol. let disipate for an hour.

Chassis saver it front to back. if the chasssis saver has dried for more than 8 hrs but less than 24 hrs, you can monstaliner right over it without any more prep work or issues.

I reccomend doing the chassis saver on a friday eve, and doing the monstaliner like saturday morning after 10 (check weather)

it went really easily, and i am so pleased with it.