the right clutch
01-12-2015, 11:00 PM
#1
Newbie
Thread Starter
Join Date: Dec 2014
Location: new hampshire
Posts: 26
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1988
Model: Cherokee
Engine: 4.0
the right clutch
hey e1 , im doing the ba/10 to a ax-15 swap and am going to put a new clutch in her.my jeep is and 88 and the donor is a 96 .Do I go with clutch for the 96 or does it matter ,also I am looking for a nice clutch . not a cheap clutch ,need ideas ,ty
01-13-2015, 08:41 AM
#3
CF Veteran
Join Date: Mar 2010
Location: Broward County Fl.
Posts: 47,923
Likes: 0
Received 22 Likes
on
22 Posts
Year: 1989 xj sport 2dr
Model: Cherokee
Engine: 12 hole bosch Injectors
Renix flywheel so it works with cps, and 96 from there out. Gotta get different pilot bearing dont forget renix cranks different from Ho.
01-13-2015, 08:45 AM
#4
CF Veteran
Join Date: Mar 2010
Location: Broward County Fl.
Posts: 47,923
Likes: 0
Received 22 Likes
on
22 Posts
Year: 1989 xj sport 2dr
Model: Cherokee
Engine: 12 hole bosch Injectors
BAHNHOF HD CLUTCH KIT 94-06 JEEP WRANGLER TJ/ CHEROKEE XJ 4.0L DAKOTA 3.9L.....http://www.ebay.com/itm/BAHNHOF-HD-CLUTCH-KIT-94-06-JEEP-WRANGLER-TJ-CHEROKEE-XJ-4-0L-DAKOTA-3-9L-/160824633988?pt=Motors_Car_Truck_Parts_Accessories&fits=Model%3ACherokee&hash=item2571e52a84&vxp=mtr Good also
01-13-2015, 12:00 PM
#5
Newbie
Thread Starter
Join Date: Dec 2014
Location: new hampshire
Posts: 26
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1988
Model: Cherokee
Engine: 4.0
so I need the clutch disc and pressure plate for the ax-15 but need a pilot shaft bushing for the renix to accept the ax-15 trans, right? what if I change flywheel too ? will I be able to use the whole 96 kit?
Last edited by cherokee-4; 01-13-2015 at 12:27 PM.
01-13-2015, 12:19 PM
#6
CF Veteran
Join Date: Dec 2011
Location: Roanoke, VA
Posts: 1,050
Likes: 0
Received 2 Likes
on
1 Post
Year: 1990
Model: Cherokee
Engine: 4.0
Correct. Now, as far as quality clutches...Well, I got one at advance (because I work there, so it was even less expensive 
and I like buying things at the store because warranties are a lot easier) and it's worked a dream, except for the throw out. Came with a plastic throw out bearing that exploded after about 4 months, wasn't too bad just had to go in, explained what happened, and had them warranty out a throw out that is cast (national/federal mogul, can't recall p/n) and put that in, everything's been great since
and I like buying things at the store because warranties are a lot easier) and it's worked a dream, except for the throw out. Came with a plastic throw out bearing that exploded after about 4 months, wasn't too bad just had to go in, explained what happened, and had them warranty out a throw out that is cast (national/federal mogul, can't recall p/n) and put that in, everything's been great since
Thread
Thread Starter
Forum
Replies
Last Post
cpnwrench
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
13
02-15-2024 08:09 AM
NM-XJ
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
18
10-23-2018 04:21 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)