Replacing manual window
07-23-2012, 02:32 PM
#1
Newbie
Thread Starter
Join Date: Jul 2012
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
Replacing manual window
My '97 Sport was broken into a while back and I need to put in a new passenger-side rear window. It's a manual window, which I hope makes things easier.
Is this a project that someone with little vehicle experience can do without too much trouble?
Do I have to replace the entire regulator thing, or can I leave it in and just attach the window at the stud nut?
The window crank worked fine before it was broken. Thanks for reading.
Is this a project that someone with little vehicle experience can do without too much trouble?
Do I have to replace the entire regulator thing, or can I leave it in and just attach the window at the stud nut?
The window crank worked fine before it was broken. Thanks for reading.
Thread
Thread Starter
Forum
Replies
Last Post
Blackcherokee290
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
27
07-26-2022 07:52 PM
Bucko
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
2
11-04-2018 09:52 PM
olas
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
2
08-27-2015 05:57 PM
Waynerd
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
2
08-25-2015 11:34 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)