Replacing an axle seal on right front of 88 cherokee xj
#2
if you mean the passenger side and have the 2 piece axle. you can get to it by pulling the the shift fork out. also have to pull outer axle. I use a slide hamer to install. not a lot of room in there to work.
#3
Seasoned Member
Join Date: Oct 2009
Posts: 254
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2001
Model: Cherokee
Engine: 4.0L
It comes out right there... can be a bit of a pain to get it out. You may need to "engineer" something to push all the way from the drivers side axle tube.
#5
Seasoned Member
Join Date: Oct 2009
Posts: 254
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2001
Model: Cherokee
Engine: 4.0L
Yeah. Its a pic of the vac motor port... I know it well. I did both my axle seals at the same time, and made a crazy contraption to punch the Passenger seal out from all the way across from the drivers side....er... wait... no I think I am confusing my self. Isn't the seal on the outboard side? Maybe my contraption was for setting the new seal in, I think I just hammered the old one out from the passenger side wheel. Sorry for the confusion... it's been a while. IIRC, I just used a socket that barely fit in the tube and a long extension to hammer out the old seal. Getting the new one back in was a bit more... exciting...
#7
Ok so how in the world do u get the new seal in. ? Im replacing the seal on the right front. I really dont wanna tear down my driverside . That sounds lil rediculous to put a seal in. I almost had it tapped in but wen I inserted the axle shaft I popped it back out. I cant tap it anymore with flat head and hammer cuz it gonna start messing it up . ?? Need help :/
Trending Topics
#8
Seasoned Member
Join Date: Oct 2009
Posts: 254
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2001
Model: Cherokee
Engine: 4.0L
.... yeah.... You need to engineer something if you don't want to remove the drivers side. I have read where people have used a combination of a long rod of all-thread, some nuts & washers to make a gizzy that will PULL the seal into place from the Passenger side using a drill or wrench.... you can try that maybe.
#10
Well I found a write up on a tool to make I made it cantvget it work right to seat the seal. I have an "omix seal" there r aton of diff inner axle seals im wondering if the previous owner just stuck a seal in. ? I ruined my new one tryin to install it.