Replace starter, acquire transmission knock?
10-13-2017, 07:01 PM
#1
Junior Member
Thread Starter
Join Date: Aug 2016
Location: Washington
Posts: 44
Likes: 0
Received 1 Like
on
1 Post
Year: 2000
Model: Cherokee
Engine: 4.0L AMC-242 I6
Replace starter, acquire transmission knock?
So, I don't know why I keep getting these problems whenever I install things at first.
I took out the old factory starter and replaced it with the same one (except newer, obviously), started the car and now there's a new knock that wasn't there before.
Any ideas? I'm almost assuming this is a normal thing to have happen on a new starter.
EDIT: Put the factory starter back in, no knocking noise at all now. Sounds it's time to send the new one back.
I took out the old factory starter and replaced it with the same one (except newer, obviously), started the car and now there's a new knock that wasn't there before.
Any ideas? I'm almost assuming this is a normal thing to have happen on a new starter.
EDIT: Put the factory starter back in, no knocking noise at all now. Sounds it's time to send the new one back.
Last edited by HyenaXJ; 10-13-2017 at 08:15 PM.
