I beat on mine for 2 days then a buddy gave me a 2 jaw puller and I heated it with MAP gas then used puller and presto.

Thanks everyone. It's gonna be this weekend before I can try. I'll let you know how it goes.

Looking forward to an update... Good luck :gunsmilie:

Borrowed a Pitman Puller from Advance and had it off in less than 10 min! I couldn't believe it was that easy. Thanks for the solid advice!

definitely use a pitman arm puller. Rent it from the auto parts store. It pops right out.

i used mapp gas, pb blaster, and a decent sized hammer with no luck, didnt have a car to drive to go rent/buy a pitman arm puller so this was my solution.

big c-clamp with a 1 1/6 deepwell socket, tighten the c-clamp as tight as you can and give it a good whack or two and it should pop out.

*didnt resize picture so you can see exactly what i did*

http://www.ep-comps.com/steeringstabilizerbolt.jpg

Hey, that's what we're here for =) good luck with the new stabilizer!