1SickCherokee

Say you want to take your doors off and you have power locks and windows,what do you do about the wire running to the door panel?

CodeXJ

You cut it, maybe put a wire not on the end of it, and wrap it in electrical tape. Where you cut it, however, is up to you. I'd trace it back as far as possible.

Or are you talking you want to be able to remove, then reinstall later and have it still work? If that's the case, make a run to Autozone and get some male/female bullet connectors.

wicked_xj

behind ur kick panel there a plug/unplug it

Howler_GT

X2 on What Wicked said.
Unscrew the kick panel and you will find factory connectors.

1SickCherokee

Ya im talking about taking them off and then putting them on later,kind of like how you can do on a wrangler.

00XJsport

yeah they unplug like what wicked said...

then you have to cut the hinge pin with a dremel tool or something on the door and use a bolt as the pin (i think 5/16 will work)...