Relocating Front door speakers
#1
Newbie
Thread Starter
Join Date: Mar 2008
Location: Kennesaw
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts
Relocating Front door speakers
Has anybody found a good spot to mount the front door speakers somewhere in the front of their XJ's, i have a 99, and am going to be taking the doors off soon, and thats all i have inthere for speakers is just the front 2. I have looked down around byt the sides of the floor, but on the passenger side there is the fuse block panel. Anybody found anywhere good to put them, i have 2 6x9's to go into the back i will put them somewhere since i have boxes for them. And plan on getting a 4 channel amp to run everything. And pics would help as well thanks!!!!
#2
Senior Member
Join Date: May 2009
Location: North Jersey
Posts: 747
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996 XJ Sport 2007 KJ Rubicon
Engine: 242 4.0 Ho, 226 3.7 V6
I have a 96 so I'm not sure if it's the same for yours, but I put a set 5.25's in my kickpanels. If I ground off the little nubs on the metal skin behind the panel I could it a 6" or so in there. It also depends on speaker depth. You could always build up a ring so it seats properly and attach that to the panel. I'll try and post a pic.
#3
Senior Member
Join Date: May 2009
Location: North Jersey
Posts: 747
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996 XJ Sport 2007 KJ Rubicon
Engine: 242 4.0 Ho, 226 3.7 V6
#5
Newbie
Thread Starter
Join Date: Mar 2008
Location: Kennesaw
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts
yours may be a lil different, i see where u could put i to n the drivers side, but i have a fuse panel on the passenger side, and no room for the speaker. i will try to get pics up later today
#7
Senior Member
Join Date: Apr 2009
Location: central IL
Posts: 845
Likes: 0
Received 0 Likes
on
0 Posts
Year: 01
Model: Cherokee
Engine: 4.0
To bad you can't put another sound bar in the front that would be sweet i also wondered how to do that when i took off my doors on my 99 make sure you keep all the bushings for when you put it back together or your doors will sag i used 3/8s bolts had to drill the door hindges out to 3/8s and it works great good luck man pics also
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
Rotorhead
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
20
09-23-2023 04:17 PM
olas
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
2
08-27-2015 05:57 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)