rear shocks?
#1
Junior Member
Thread Starter
Join Date: Feb 2009
Posts: 36
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
rear shocks?
I am installing my lift kit and i got the front done. Now i moved on to the rear and i cannot seem to get the bolts at the top undone. is there and easy way of doing this? thanks alot
#3
Seasoned Member
Join Date: Dec 2008
Posts: 495
Likes: 0
Received 2 Likes
on
2 Posts
Year: 1995
Model: Cherokee
Engine: 4.0L High Output
Well if they aren't broken yet, don't break them! Use plenty of PB blaster and let it soak in nice and good. Just go slow and they should come out ok. If they do break though, you might end up having to refer to the write-ups about how to fix them that mastershake suggested...
#4
Seasoned Member
Join Date: Dec 2008
Posts: 434
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1989
Model: Cherokee
Engine: 4.0L renix
spray pb blast up behind them. there is a little pocket that lets you get to the back of the bolts.
if that doesnt work and they break you will need a hammer and a chisel or and air chisel. just chisel out the old weld nut and leftover bolt then fish a new bolt down through the pocket.
if that doesnt work and they break you will need a hammer and a chisel or and air chisel. just chisel out the old weld nut and leftover bolt then fish a new bolt down through the pocket.
Thread
Thread Starter
Forum
Replies
Last Post
Rich164
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
8
09-08-2015 08:32 AM
Sandyman
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
5
09-05-2015 07:56 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)