Jeep Cherokee Forum

Jeep Cherokee Forum (https://www.cherokeeforum.com/)
-   Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here (https://www.cherokeeforum.com/f2/)
-   -   Rear Pinion Seal. (https://www.cherokeeforum.com/f2/rear-pinion-seal-97056/)

Ladwig23 07-19-2011 12:15 AM
Rear Pinion Seal.
 
I need a little help doing my rear pinion seal..do I just take my rear driveline off and pull the rest or it out? Or how would I go about this process...my jeep is a 1990 xj 4" lift on 33 mickey thompsons 4.0 V6...thanks

victorlanda 07-19-2011 01:34 AM
Originally Posted by Ladwig23 (Post 1097362)
I need a little help doing my rear pinion seal..do I just take my rear driveline off and pull the rest or it out? Or how would I go about this process...my jeep is a 1990 xj 4" lift on 33 mickey thompsons 4.0 V6...thanks
first, welcome to the forum.
If you have a 1990 jeep XJ and a 4" lift on 33" MT you SHOULD know that the 4.0 is NOT a V6 it's a I6. STRAIGHT not V.
I'M NOT YELLING :pirate:
this link should help.
https://www.cherokeeforum.com/f51/xj...acement-43429/
just remove the driveshaft, remove the yoke nut, washer, old seal, place the new seal in.
good luck.

Slick761 07-19-2011 02:36 AM
Originally Posted by victorlanda

first, welcome to the forum.
If you have a 1990 jeep XJ and a 4" lift on 33" MT you SHOULD know that the 4.0 is NOT a V6 it's a I6. STRAIGHT not V.
I'M NOT YELLING :pirate:
this link should help.
https://www.cherokeeforum.com/f51/xj...acement-43429/
just remove the driveshaft, remove the yoke nut, washer, old seal, place the new seal in.
good luck.
If you read the op you SHOULD know he's doing the REAR pinion seal not the FRONT. Haha jk.

trans_am7935 07-19-2011 02:41 AM
ok first you have to roll the jeep on to its side, then you have to remove the t-case, and then take off the drivers door. take your drivers door and throw it off a mountain and WALLA..all done!!!. jk, just follow the write-up in previous post, it is right on the spot

Slick761 07-19-2011 02:47 AM
You know.. since were all raggin and jk'n this.guy, all our.pinion seals WILL fail on the trail leaving us with the other kind of welded spider gear. Karma :-)

trans_am7935 07-19-2011 03:38 AM
Originally Posted by Slick761 (Post 1097537)
You know.. since were all raggin and jk'n this.guy, all our.pinion seals WILL fail on the trail leaving us with the other kind of welded spider gear. Karma :-)
couldn't help it, he called the 4.0 a V6...we all started somewhere

Slick761 07-19-2011 03:46 AM
;)

victorlanda 07-19-2011 04:12 AM
Originally Posted by Slick761 (Post 1097537)
You know.. since were all raggin and jk'n this.guy, all our.pinion seals WILL fail on the trail leaving us with the other kind of welded spider gear. Karma :-)
^^
X2


Originally Posted by trans_am7935 (Post 1097573)
couldn't help it, he called the 4.0 a V6...we all started somewhere
^^
X2


yep, just follow the write up its the SAME thing for the REAR eh. jk


All times are GMT -5. The time now is 11:02 PM.


© 2024 MH Sub I, LLC dba Internet Brands