Rear leaf springs help please!!!!
Okay so I know that this has probably been talked about a lot but I just can't seem to find the answer I'm looking for. To start, I have a 2001 Jeep Cherokee. It has the stock suspension on it and I finally have to give in and buy new leaf springs. When I spoke with a mechanic he also suggested getting a two inch block lift to fix the clearance issues I was having with my wider rims. Also, the shocks are brand new. I don't want to have to replace them again. I still have a few questions though...
- Should I just get stock replacement leafs?
- if I get leafs with a 2.5" lift, do I have to replace the shocks?
- do I need new shocks with blocks?
- where can I get these parts without spending a ton of money?
Any information would help. Thanks.
- Should I just get stock replacement leafs?
- if I get leafs with a 2.5" lift, do I have to replace the shocks?
- do I need new shocks with blocks?
- where can I get these parts without spending a ton of money?
Any information would help. Thanks.
Old School CF Moderator
Joined: May 2010
Posts: 9,652
Likes: 3
From: Chattanooga
Year: 2001
Model: Cherokee
Engine: 4.0
If you bought stock length shocks then you will basically lose 2 inches of travel if you lift it.
I'd say buy a 2" coil spacer
And then buy 2" old man emu leaf packs..
Your shocks will most likely limit your flex (which is not ideal) but it will work.
Don't run a block..so many better options.
I'd say buy a 2" coil spacer
And then buy 2" old man emu leaf packs..
Your shocks will most likely limit your flex (which is not ideal) but it will work.
Don't run a block..so many better options.
Old School CF Moderator
Joined: May 2010
Posts: 9,652
Likes: 3
From: Chattanooga
Year: 2001
Model: Cherokee
Engine: 4.0
Buy 2 of these http://www.quadratec.com/products/16...FQbqnAod0mQAIg
You will also need to buy bushings for them.
You will also need to buy bushings for them.
Thread
Thread Starter
Forum
Replies
Last Post
RickJames Bish
Modified XJ Cherokee Tech
5
Sep 2, 2015 03:22 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)



