Rear Bumber for 92 Cherokee Laredo
#1
Newbie
Thread Starter
Join Date: Nov 2008
Posts: 27
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
Rear Bumber for 92 Cherokee Laredo
How difficukt is it to repolace the rear bumber on a 1992 Cherokeee Laredo? When i bought mine it was indented in the center and i have never did anything with it. it looks like the previous owner may have backed up into something. how much would it cost for a bimber replacement? thanks for your help
#2
"CF Moderator"
Join Date: Sep 2008
Location: N.J. Shore Area
Posts: 3,045
Likes: 0
Received 2 Likes
on
2 Posts
Year: 1994
Model: Cherokee
Engine: l6 HO
How difficukt is it to repolace the rear bumber on a 1992 Cherokeee Laredo? When i bought mine it was indented in the center and i have never did anything with it. it looks like the previous owner may have backed up into something. how much would it cost for a bimber replacement? thanks for your help
#3
8 15mm bolts hold the bumper braces to the body. If the existing bolts have any rust, it is strongly advised to soak them with PB Blaster several times before attempting to remove them. The bolt heads will snap off easily.
#4
Newbie
Thread Starter
Join Date: Nov 2008
Posts: 27
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
8 bolts? im not that handy, however, that seems like something i can tackle. thanks very much, ill try a few junkyards and see if i can find a 1992 rear bumber.
Thread
Thread Starter
Forum
Replies
Last Post
rusty_bucket
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
3
08-29-2015 06:42 AM
jghaenlein
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
8
08-27-2015 07:07 AM
14lgreer
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
3
08-21-2015 01:46 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)