Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here XJ (84-01)
All OEM related XJ specific tech. Examples, no start, general maintenance or anything that's stock.

Random stalling at corners-oil guage

Thread Tools
 
Search this Thread
 
Old Aug 29, 2010 | 05:56 AM
  #1  
MMKNC's Avatar
Thread Starter
Newbie
 
Joined: Aug 2010
Posts: 2
Likes: 0
Model: Cherokee
Default Random stalling at corners-oil guage

Need help. I have a Jeep that will randomly stall at corners (usually at the worst times). There is no sign that it is getting ready to stall. When it does it takes any where from 20min - 12 hours to start again. It will try to crank but will not fully turn over (Start). I have also noticed that the oil guage bounces all over the place. When first starting out it will bounce any where from comp. off the guage past 60 then hit 30 then maybe back up to 50-60 etc. all within a about a half of block until apr. 5 miles or so.

Any thoughts????
Reply
Old Aug 29, 2010 | 09:25 AM
  #2  
trans_am7935's Avatar
CF Veteran
 
Joined: May 2009
Posts: 1,844
Likes: 4
From: Glen Burnie, MD
Year: 1994
Model: Cherokee
Engine: 4.0 H.O. K&N, Borla headers, custom down pipe, magnaflow hi-flo cat, flowmaster to turn down tip
Default

sounds like you have a bad pressure sensor. on the stalling part, since you will randomly get a bad crank, and stall especially on corners...then i would say you have a bad ground. first take off the battery terminals and clean them really good. then follow the negative cable all the way back to the block and ensure the stud and the nut are in the block tight!
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
ra.stewart
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
9
Feb 15, 2021 01:47 PM
keisersxj
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
6
Apr 17, 2020 03:19 AM
shelby5041
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
8
Jul 20, 2016 04:38 PM
Endlessknight
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
4
Sep 26, 2015 03:20 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT -5. The time now is 03:53 AM.