![]() |
Quick question: toggle switch.
89 XJ 4.0 auto 4x4 97,000 miles Hey, I'm back with a simple question this time. Quick info. All the cooling system is new other than the block. My electric fan has never kicked on so I just been jumping it together with a paper clip. In traffic it will start to go up after a while. The fan is running but it runs from start up so it's not kicking on giving that rush of cold air. I know the fan is helping because it takes a while and I've drove one with no fan so I know how fast it would run hot without one in traffic in 95 degrees. So I'm finally hooking it up to a toggle switch so I can kick it on myself and get a rush of cold. Here's my simple question. Where can I put the wire through to get under the dash? For the love of me I don't see an opening. Do I have to drill a hole? |
Try this. I dont know if this plug is present for all years tho.
http://venture4wd.com/2014/09/breach...wall-of-an-xj/ |
Originally Posted by Chick-N-Picker
(Post 3489915)
Do I have to drill a hole? Do not drill a hole!!! Getting it in the wrong place can cause lots of heartache. When I did it, I seem to remember going through the grommet next to the hood latch cable. Just punch through with an awl or a nail or something similar. Here's how to do the wiring. Most folks do it wrong. |
| All times are GMT -5. The time now is 07:06 AM. |
© 2026 MH Sub I, LLC dba Internet Brands