Quick APN header question!
#1
Seasoned Member
Thread Starter
Join Date: Dec 2009
Location: LaGrange, Ky
Posts: 391
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1998
Model: Cherokee
Engine: 4.0l inline 6, bored tb.
Quick APN header question!
Okay so Im looking into buying an APN Header for my 98 xj. That being said at the same time i am going to be upgrading my intake to a 99+, my question is will i have any fitment issues? I have searched all over for the answer and cant quite find my specific set up. Any comments or answers would be greatly appreciated. Thanks in advance.
#3
Junior Member
Join Date: Nov 2011
Location: Las Vegas
Posts: 67
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1999
Model: Cherokee
Engine: 4.0
I have a 1999 cherokee and the apn header sucks. I had to grind off the last runner on the intake manifold and dimple the apn header to make it fit. Pain in the *** but not a big deal and I expected it.
Installed the header and still had an exhaust leak. Blew out the gasket at the #5 exhaust port, got a high end felpro gasket, still leaked. Copper coat, still leaked.
After taking it apart and putting it together 5 times I ordered a stock replacement header and installed it, worked fine the first time.
Not sure why I had such bad luck but the exhaust manifold flange was slightly warped from the manufacturer and due to me "modifying it" to make it fit a 99 (even though the part says it fits a 1999) I got screwed out of the money for the apn, so my advice is to stay far far away
Installed the header and still had an exhaust leak. Blew out the gasket at the #5 exhaust port, got a high end felpro gasket, still leaked. Copper coat, still leaked.
After taking it apart and putting it together 5 times I ordered a stock replacement header and installed it, worked fine the first time.
Not sure why I had such bad luck but the exhaust manifold flange was slightly warped from the manufacturer and due to me "modifying it" to make it fit a 99 (even though the part says it fits a 1999) I got screwed out of the money for the apn, so my advice is to stay far far away
#4
Seasoned Member
Thread Starter
Join Date: Dec 2009
Location: LaGrange, Ky
Posts: 391
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1998
Model: Cherokee
Engine: 4.0l inline 6, bored tb.
Thanks Guys I have heard alot of good things from many people about the apn header. Does anybody know about how much grinding i will have to do. Pics would be good if anyone has them.
#5
CF Veteran
Join Date: May 2011
Posts: 1,064
Likes: 0
Received 1 Like
on
1 Post
Year: 99
Model: Cherokee
Engine: 4.0
I have a 99 and did not have to grind anything. And yes, it has a 99 intake. It is imperative that you follow the installation instructions to the letter. I have had no issues at all. It fit great and works great.
Thread
Thread Starter
Forum
Replies
Last Post
Azzy
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
0
09-08-2015 10:49 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)