I just bought some subs and a new amp and want to install it in my 2000 Cherokee Sport, but need some tips on where to run the amp power cable to the battery. Should I just run it through the firewall or find some other cables that run through and just put it through that?

 

I put mine under the rear seat and ran the wires under the trim to the firewall.I then ran wires through the firewall with the other factory wires.

 

X2 That's what I did, just make sure it's not by any speaker wire. (I ran power wires under door trim passenger side. All other wiring under door trim driver's side. Other wise you pick up a noticeable static noise.