I have order new 19ib injectors for my 1990 renix from a ebay seller and wonder:

do i need a fuel rail and
a fuel pressure regulator from a HO?

and do i need to do somthing with the fuel pressure?

sorry for my bad english.. i'm from Norway

 

19lb injectors should be a straight swap. nothing should need to be changed. just dont bend the fuel rail when you are taking it off.

 

Thanx for the replay..


wath i want is bether gas milage, some tell me that if i use the ford injectors i can get 5 to 15% bether gas milage.. thats all i care about


Some say i get smoother idle and slightly better performance?

 

hey MadButcher, good move man!.....my best friend in grade school was from Oslo - Peter Davami........i'm going with the chrysler/bosch injectors (5277739 and 0 280 155 703) - same difference, straight plug and play.....make sure to use new o-rings and dab some oil on them before installing so they don't rip.....look here for some more tips on renix engine injector swap.... http://www.lunghd.com/Tech_Articles/...r_Upgrades.htm ...good luck!

 

Use vasoline on o rings much better.